Switch Settings For Pure Data ARCNET AdaptersLast reviewed: November 21, 1994Article ID: Q32849 |
The information in this article applies to:
SUMMARYThis article discusses switch settings for the IBM Pure Data ARCNET Network Adapter.
MORE INFORMATIONThe following are switch-configurable parameters for the Pure Data ARCNET adapter and the conflicts that may result:
The following are Interrupt Line Address switch settings:
(Switch SW2)
Interrupt 2 - Switch 3 off, 4 through 8 on
Interrupt 3 - Switch 3 on, 4 off, 5 through 8 on
Interrupt 4 - Switches 3 & 4 on, 5 off, 6 through 8 on
Interrupt 5 - Switches 3 through 5 on, 6 off, 7 & 8 on
Interrupt 7 - Switches 3 through 7 on, 8 off
The following are Base I/O Address switch settings:
(Switches SW1 and SW2)
Address 2E0h - SW1 7 & 8 on, SW2 1 on, 2 off
Address 2F0h - SW1 7 & 8 on, SW2 1 & 2 on
The following are Memory Address switch settings:
(Switch SW1)
Address C000 - Switches 1 & 2 on, 3 & 4 off
Address D000 - Switches 1 & 2 on, 3 off, 4 on
Address E000 - Switches 1, 2 & 3 on, 4 off
|
KBCategory: kbnetwork kbdisplay kbhw kb3rdparty
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |