Dip Switch Settings for Epson 286eLast reviewed: November 30, 1994Article ID: Q43868 |
The information in this article applies to:
SUMMARYThe following dip switch settings have been tested and work correctly on the Epson 286e when printing from Windows-based applications. These settings are also for use with Microsoft Windows, Microsoft Excel, and Microsoft Pageview. The settings are as follows:
Switch Setting SW1: 1 off (dip switch down is off) 2 off 3 off 4 off 5 off 6 on (dip switch up) 7 on 8 on SW2: 1 off 2 off 3 off 4 off MORE INFORMATIONThese dip switches are located on the back of the Epson 286e. These settings conform to the settings listed when the Info menu option of the Epson 9-pin printer driver is selected from the Control Panel's Setup/Printer menu. The listed settings are:
Skip-Over-Perf OFF Auto LF OFFThe Epson products included here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
|
KBCategory: kbhw kb3rdparty
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |