Everex 1200 and 2400 BPS Modems and Windows Terminal

Last reviewed: November 22, 1994
Article ID: Q63585
The information in this article applies to:
  • Microsoft Windows operating system versions 3.0, 3.0a, 3.1, 3.11

SUMMARY

The Everex 1200 and 2400 bits-per-second (BPS) Modems require adjustments to the Modem Commands section of the Terminal program included with Microsoft Windows.

MORE INFORMATION

To dial properly, you should perform the following steps:

  1. Select Settings.

  2. Choose Modem Commands.

  3. Set Modem Defaults to None.

  4. Set Dial Prefix to ATDT.

  5. Set Hangup Prefix to +++.

  6. Set Hangup Suffix to ATH.

  7. (Windows 3.0 only) Set Answer to ATQ1E0S0=1.

  8. Set Originate to ATQ1.

  9. Choose OK.


KBCategory: kbhw kbtool kb3rdparty
KBSubcategory:win30 win31 wincomm
Additional reference words: 3.1 3.10 3.0 3.00 3.11 Wincomm


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 22, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.