Using Intercon Gold Card with Windows 3.0

Last reviewed: November 23, 1994
Article ID: Q70766

The information in this article applies to:

Microsoft Windows operating system versions 3.0, 3.0a

SUMMARY

The Intercon Gold Card is a font card for the IBM 4019 and 4019E LaserPrinter. The Intercon Gold Card ships with a disk containing the printer definition file and procedures necessary to enable use of the fonts contained in the Gold Card with Microsoft Windows 3.0. These files must be installed before the Gold Card can be used.

MORE INFORMATION

When using the Intercon Gold Card and the IBM 4019 LaserPrinter with Microsoft Windows 3.0, the printer must be set to HP emulation mode. The Windows 3.0 HP/PCL driver must also be installed before the Intercon Windows driver is installed.

For more information, contact Intercon Technical Service.

REFERENCES

"Intercon Gold Card Font Card Manual for MS Windows," pages 4.1-4.4

KBCategory: kbother
KBSubcategory: win30
Additional reference words: 3.00 win30 3.00a

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 23, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.