Display Driver Version 1.06 for NEC Graphics Engine (DGIS)Last reviewed: November 23, 1994Article ID: Q71123 |
The information in this article applies to:
SUMMARYTo ensure proper operation of Microsoft Windows 3.0 and Windows applications, verify that you are using version 1.06 or later of the NEC DGIS driver. To verify the version number, select Setup from within the Windows Program Manager. If you experience problems with a driver version earlier than 1.06, you should obtain the latest version of the DGIS driver from NEC.
MORE INFORMATIONThe NEC DGIS driver for Windows 3.0 is a high-resolution display driver supporting resolutions up to 1024 x 768. The latest version of the driver is available from the NEC bulletin board in a single self-extracting file called MGEWN30.EXE. According to the README.1ST file with version 1.06 (dated 2/25/91), the following corrections have been made:
MGEWN30 EXE 204800 03-07-91 8:44p DGIS3HI DRV 86624 02-01-91 4:08p DEFAULT PAL 162 08-30-90 11:35a DGIS3LO DRV 84944 02-01-91 4:09p DGISVGA GR3 14848 05-31-90 10:06a OEMSETUP INF 3750 02-01-91 3:56p DGIS EXE 20874 08-27-90 9:34a DGIS OUT 74708 08-27-90 1:57p OEMSETUP 720 3951 02-01-91 3:56p DGISCFG EXE 21664 12-10-90 1:06p DGISCFG HLP 18006 12-10-90 1:07p README 1ST 17074 02-25-91 11:48aFor more information, contact NEC technical support. The NEC products included here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
|
KBCategory: kb3rdparty kbdisplay
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |