AST 386 and Bus Mouse Ports

Last reviewed: November 22, 1994
Article ID: Q71740
The information in this article applies to:
  • Microsoft Windows operating system versions 3.0, 3.0a

SUMMARY

AST Research, Inc. has updated Programmable Logic Array (PAL) chips available that correct bus-card timing problems on AST 386 systems. The updated PAL chips solve the problem of jumpy (or jerky) mouse movement in Microsoft Windows version 3.0 when you use a bus-style mouse.

MORE INFORMATION

AST Research, Inc., 386 systems with motherboards numbered 202273 and 202356 may need a PAL chip update to correct bus-card timing problems. The PAL revision that needs replacement is 107101-557B. This number appears on the top of the chip. It should be replaced with 107101-557C.

On motherboards numbered 202273, the chip location is socket U46. On motherboards numbered 202356, the chip location is socket U74.

For more information regarding replacement of this chip, contact AST Research technical support.

The products included here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these product's performance or reliability.


KBCategory: kbhw kb3rdparty
KBSubcategory: win30
Additional reference words: 3rdparty 3.0 3.00a 3.0a driver


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 22, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.