HP Plotters Supported with Windows 3.0

 Last reviewed: November 23, 1994
Article ID: Q72051
The information in this article applies to:
  • Microsoft Windows operating system versions 3.0, 3.0a

SUMMARY

The following Hewlett-Packard (HP) Plotters are supported by version NVF27MAR90 (version 2.2) of the Plotter driver: 

   Colorpro (7440A)
   Colorpro with the Graphics Enhancement Cartridge (7440A and 17440A)
   7470A
   7475A
   7550A
   7580A
   7585A
   7580B
   7585B
   7586B
   Draftpro (7570A)/DXL/EXL
   Draftmaster I (7595A)
   Draftmaster II (7596A)
If you use 7580B and 7585B, use the equivalent 7580A or 7585A driver IF the plotter serial number prefix is less than 2402.

MORE INFORMATION

To verify the above version number, follow these steps:

  1. From the Control Panel, select Printers.

  2. Select the Plotter driver, then press Configure.

  3. Select Setup.

  4. In the upper left-hand corner of the Plotter dialog box, click the Control menu and choose About. This will give you the version number and the supported plotters.

KBCategory: kbother
KBSubcategory: win30
Additional reference words: 3.00 win30 3.00a

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 23, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.