Micronet SCSI Controller Requires MNDOSM.SYS

 Last reviewed: November 22, 1994
Article ID: Q84519
The information in this article applies to:
  • Microsoft Windows operating system versions 3.0, 3.0a, 3.1, 3.11

SYMPTOMS

Running a Micronet SCSI controller with EMM386.EXE version 4.44 may lead to loss of data when running Microsoft Windows operating system 3.1 or MS-DOS- based applications.

RESOLUTION

MNDOSM.SYS comes with the SCSI controller and should be loaded in the CONFIG.SYS file to correct this problem.

You should have received this driver with your controller card. One exception would be when the SCSI controller is used on an OS/2 dual boot machine. You may have only received the OS/2 driver. Contact Micronet Technical Support to receive the driver for MS-DOS.

The products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

KBCategory: kbhw kb3rdparty
KBSubcategory: win31 win30
Additional reference words: 3.10 3.11 3.00a 3.00 3rdparty

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 22, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.