Novell Server Disconnect Hangs Enhanced Mode Windows

Last reviewed: November 21, 1994
Article ID: Q87984

The information in this article applies to:

Microsoft Windows operating system versions 3.0, 3.0a, 3.1, 3.11

SYMPTOMS

If Microsoft Windows is running on a Novell workstation in 386 enhanced mode while connected to a Novell server, and the server stops functioning and/or disconnects the workstation, then the workstation may hang and display the error message:

     System Error cannot read from device network.

This occurs even if Windows is installed in a standalone configuration. Novell is aware of the problem and is working to correct this.

WORKAROUND

To work around this problem run Windows in standard mode.

The NetWare product included here is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

KBCategory: kbnetwork kbdisplay kb3rdparty kberrmsg
KBSubcategory: win30 win31
Additional reference words: 3.00 3.00a 3.10 stand alone stand-alone

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.