IPX Not Listed in Available Protocols in Control Panel

 Last reviewed: November 21, 1994
Article ID: Q89781
The information in this article applies to:
  • Microsoft Windows for Workgroups version 3.1

SUMMARY

The Novell NetWare protocol IPX is not listed in the Available Protocols dialog box in the Network options in Control Panel when you choose the Adapters button and then choose the Setup button.

MORE INFORMATION

Because Novell NetWare is the only network that uses the IPX protocol, Windows for Workgroups does not allow IPX to be added as a standalone protocol. IPX must be added by installing Novell NetWare Connectivity through Windows for Workgroups. To add Novell NetWare Connectivity take the following steps:

  1. From the Main group, start Control Panel.

  2. Choose the Network icon.

  3. Choose the Networks button.

  4. Novell NetWare should appear on the left in the Available Network Types list. Select Novell NetWare and choose the Add button, then choose the OK button.

This also adds the Novell NetWare button to File Manager and Print Manager. If IPX were added alone, the NetWare button(s) would not be present in File Manager or Print Manager, and thus not be possible to map drives or capture printers from within Windows for Workgroups for the Novell file servers in use.

IPX is a proprietary Novell NetWare protocol. The Windows for Workgroups implementation of IPX is in two parts: MSIPX.SYS and MSIPX.COM. These two files replace the single Novell NetWare file IPX.COM.

KBCategory: kbnetwork kbprb kb3rdparty
KBSubcategory: wfw wfwg
Additional reference words: 3.10 gerb 3rdparty

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.