WFWG with NetBEUI Runs Slowly on Large Networks

 Last reviewed: November 21, 1994
Article ID: Q90205
The information in this article applies to:
  • Microsoft Windows for Workgroups version 3.1
  • Microsoft Workgroup Connections version 1.0

SUMMARY

You may notice that Windows for Workgroups or Workgroup Connections operates slowly for no apparent reason when connected to a large network even if you do not have any network sessions running. This is due to the amount of network traffic on a large network and the protocol NetBEUI.

MORE INFORMATION

Under NetBEUI, if one computer wants to communicate with another, it transmits a broadcast packet to determine where the other computer is. Each computer on the network must examine this packet. On a large network, this equates to almost constant packet examination by all members of the network.

There is no solution to this inconvenience. Disabling the network adapter connection stops the speed degradation, but does not allow you to access the network.

KBCategory: kbnetwork kbprb
KBSubcategory: wfw wfwg
Additional reference words: 3.10 1.00 wc

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.