Intel EtherExpress (EE) 16 Network Card Configuration

Last reviewed: July 29, 1996
Article ID: Q90325
The information in this article applies to:
  • Microsoft Windows for Workgroups versions 3.1, 3.11

SUMMARY

The Intel EtherExpress (EE) 16 network card that ships with Windows for Workgroups is a software configurable card. This card is shipping in the following Windows for Workgroups packages:

  • Windows for Workgroups Starter Kit
  • Windows for Workgroups User Kit
  • Windows for Workgroups add-on for 2 users of Microsoft Windows version 3.1
  • Windows for Workgroups add-on for 1 user of Microsoft Windows version 3.1

The settings for the card can be configured and tested in MS-DOS using the program SOFTSET.

MORE INFORMATION

SOFTSET is a utility program that allows you to configure and test the Intel EE 16 card. The Inel EE 16 works with thick or thin Ethernet cable. The board has a DIX(15 pin, D-shaped) and a BNC Connector.

If you suspect there is a hardware conflict with the Intel EE 16 card, you may want to place the card in 8-bit mode. To do this within Windows for Workgroups, take the following steps:

  1. From Control Panel, choose Network.

  2. Choose the Adapters button.

  3. Select the Intel EE 16 Adapter, then choose the Setup button.

  4. Choose the Advanced button.

  5. Set I/O Channel Ready to NEVER. This changes the IOCHRDY= line in the PROTOCOL.INI to NEVER.

You can also configure other settings on the Intel EE 16 card (that is, IRQ, I/O, and RAM addresses). For more information on changing the software configurable settings, consult the documentation for the card.


KBCategory: kbnetwork kbfile kbappnote kbhw kbprb kb3rdparty
KBSubcategory: wfw wfwg
Additional reference words: appnote Intel adapter 3.11 3.10 3rdparty


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: July 29, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.