Schedule+ Err Msg: Schedule Transport DLL Does Not Support...Last reviewed: June 2, 1995Article ID: Q90326 |
The information in this article applies to:
SYMPTOMSThe following error message may appear when you start Microsoft Schedule+ for Windows or the Schedule+ component of Windows for Workgroups (WFWG):
Your schedule transport DLL does not support the current transport. You will only be able to work offline. PCMail users are supported. CAUSEThis occurs if you are using the wrong (or corrupt) TRNSCHED.DLL file.
RESOLUTIONMake sure you only have one TRNSCHED.DLL file on your hard disk and that it is the correct one for your Schedule+ version.
Windows for Workgroups Schedule+If you are using Windows for Workgroups Schedule+, the file TRNSCHED.DLL should be located in the WINDOWS directory, and have the following properties: For version 3.11:
TRNSCHED.DLL 12960 11/1/93 3:11:00amFor version 3.1:
TRNSCHED.DLL 12960 10/1/92 3:11:00amThe TRNSCHED.DLL file is located on your original installation disks as follows:
5.25-inch disks 3.5-inch disks ------------------------------------------- WFWG 3.1 disk 8 disk 6 WFWG 3.11 disk 8 disk 6 Schedule+ for WindowsIf you are using version 1.0 of Microsoft Schedule+ for Windows, the file TRNSCHED.DLL should have the following properties:
TRNSCHED.DLL 12928 7/12/92 12:00:00amIf you are using version 1.0 or 1.0a of Microsoft Schedule+ with Windows for Workgroups, you should use the Windows for Workgroups Schedule+ TRNSCHED.DLL file from the WINDOWS directory as described above.
|
KBCategory: kbother kberrmsg
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |