Conventional Memory Change with WFWG and DYNAMIC=YES Setting

Last reviewed: November 21, 1994
Article ID: Q90328
The information in this article applies to:
  • Microsoft Windows for Workgroups versions 3.1, 3.11

SUMMARY

After you install Windows for Workgroups on a computer running Microsoft LAN Manager version 2.1, you may notice a change in available conventional memory.

MORE INFORMATION

This may be caused by having DYNAMIC=YES in the [PROTMAN] section of the PROTOCOL.INI file. The DYNAMIC=YES command causes PROTMAN.DOS to allocate memory to facilitate demand protocol architecture (DPA). Because Windows for Workgroups does not provide DPA functionality, this memory is wasted.

To recover the memory used for DPA, change DYNAMIC=NO, or remove the line all together.

DPA was first implemented with LAN Manager 2.1, and PROTMAN 2.0. DPA allows for the dynamic loading/binding and unloading/unbinding of protocols under MS-DOS.


KBCategory: kbnetwork
KBSubcategory: wfw winmem wfwg
Additional reference words: 3.10 3.11 PROTMAN PROTMAN.DOS SPARTA lanman


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.