386 Enhanced Mode Boot Sequence for Windows for Workgroups

Last reviewed: November 21, 1994
Article ID: Q90496
The information in this article applies to:
  • Microsoft Windows for Workgroups version 3.1

SUMMARY

This article describes the startup process that is performed when you start Windows for Workgroups in 386 enhanced mode.

MORE INFORMATION

Because of the integrated network functionality present in Windows for Workgroups, the boot process below is different from that of 386 enhanced mode in Windows 3.1.

  1. The user starts WIN.COM by typing "win" (without the quotation marks) at the MS-DOS command prompt.

  2. WIN.COM invokes the MS-DOS EXEC function to load the Windows 386 enhanced mode system loader (WIN386.EXE).

  3. WIN386.EXE loads the following:

    - The Virtual Machine Manager (VMM) - All virtual device drivers (VxDs) specified in the SYSTEM.INI file

  4. The network support VxD (VNETSUP.386) initializes the Windows for Workgroups VxDs. The NetBEUI protocol (VNB.386) and the NETBIOS interface (VNETBIOS.386) are bound together. The VNB.386 and VREDIR.386 are bound to the WORKGRP.SYS device driver.

  5. The network redirector VxD (VREDIR.386) starts the redirector workstation service. (This is like typing net start workstation at the MS-DOS command prompt.)

  6. WIN386.EXE loads the 386 enhanced mode kernel (KRNL386.EXE).

  7. KRNL386.EXE loads the following files:

    - The Windows drivers (identified as *.DRV in the SYSTEM.INI file) - GDI (GDI.EXE) - User (USER.EXE) - Supporting files (for example, fonts) - The Windows for Workgroups network driver (WFWNET.DRV)

  8. The network server VxD (VSERVER.386) starts the server service.

  9. The persistent network shares as configured by the Windows for Workgroups workstation are shared on the network.

  10. WFWNET.DRV loads the Network DDE background application (NETDDE.EXE) and the ClipBook Server background application (CLIPSRV.EXE).

  11. WFWNET.DRV prompts the user to log onto the network if the user has not done so already. If the user logs onto the network successfully, the WFWNET.DRV then restores the persistent network connections (for example, printer connections and file connections made during the last Windows for Workgroups session).

  12. KRNL386.EXE launches the Windows shell as identified by the shell= entry in the [boot] section of the SYSTEM.INI file. By default this is the Windows Program Manager.

REFERENCES

Windows for Workgroups version 3.1 "Resource Kit," page 2-20


KBCategory: kbusage
KBSubcategory: wfw wfwg winboot win31
Additional reference words: 3.10


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.