Setup Hangs, Reboots, or Generates Errors with Racal NI6510

Last reviewed: November 21, 1994
Article ID: Q92778

The information in this article applies to:

Microsoft Windows for Workgroups version 3.1

SYMPTOMS

If you install Windows for Workgroups over a network using a Racal NI6510 adapter, you may experience various problems. Your machine may stop responding (hang), reboot, or produce file copy errors.

CAUSE

These problems may be caused by an interrupt conflict.

WORKAROUND

To successfully install Windows for Workgroups, first try changing the interrupt on the Racal adapter. If this does not correct the problem, install Windows for Workgroups from the floppy disks.

KBCategory: kbnetwork kb3rdparty kbhw
KBSubcategory: wfw wfwg
Additional reference words: 3.10 wfwfest

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.