All DEC Etherworks Cards Are Detected as Etherworks MC

 Last reviewed: November 21, 1994
Article ID: Q92787
The information in this article applies to:
  • Microsoft Windows for Workgroups version 3.1

The following three DEC Etherworks MC Adapters are detected by Windows for Workgroups version 3.10 Setup as Etherwork MC.

  • DE210: Etherworks MC
  • DE211: Etherworks MC/TP,
  • DE212: Etherworks MC/TP_BNC

Because all three of these cards use the same drivers, you can accept Setup's default.

KBCategory: kbnetwork kb3rdparty kbhw kbsetup
KBSubcategory: wfw wfwg
Additional reference words: 3.10 set up ether work

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.