WFWG: NETX.COM Err Msg: File Server Not FoundLast reviewed: November 21, 1994Article ID: Q92870 |
The information in this article applies to:
SYMPTOMSAfter you install Microsoft Windows for Workgroups with Novell NetWare support on an Ethernet II cabling system, you may be unable to see any NetWare file servers. Also, you may receive the following error messages when NETX.COM starts:
File server not found CAUSEThis error may be caused by a conflict in data frame formats. An Ethernet II system uses its own frame format, while the default frame format for Novell support follows the IEEE 802.3 standard.
WORKAROUNDTo enable your Windows for Workgroups workstation to communicate correctly on an Ethernet II system with Novell NetWare support, you must change the frame format used by the IPX protocol to Ethernet II. To do this, use the following steps:
|
KBCategory: kbnetwork kb3rdparty kbhw kberrmsg kbprb
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |