Using the Tandem TTE Under Windows 3.1

Last reviewed: November 23, 1994
Article ID: Q93263

The information in this article applies to:

Microsoft Windows operating system versions 3.1, 3.11

SYMPTOMS

When using the Tandem Terminal Emulation application for Windows under the Windows operating system version 3.1, the following error message may occur:

   Non-Fatal I/O Error
   UART Hardware Overrun

CAUSE

The Tandem Terminal Emulation program for Windows (or Tandem TTE) is a 6526 terminal emulation program that provides emulation between a personal computer and a Tandem mainframe. The above error message may appear under Windows 3.1 in 386 enhanced mode or standard mode when running the Tandem TTE.

RESOLUTION

According to Tandem technical support, this problem may be solved by running Tandem TTE on a faster machine or lowering the bit rate on the modem (that is, from 9600 bits per second [BPS] to 2400 BPS).

For more information on Tandem TTE, contact Tandem.

KBCategory: kb3rdparty kberrmsg kbprb
KBSubcategory: win31 wincomm
Additional reference words: Windows Tandem TTE

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 23, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.