WININI.WRI from Windows for Workgroups Version 3.1

 Last reviewed: November 22, 1994
Article ID: Q93451
The information in this article applies to:
  • Microsoft Windows for Workgroups version 3.1

SUMMARY

The following information was taken from the Microsoft Windows for Workgroups version 3.1 WININI.WRI file.

MORE INFORMATION

WIN.INI File Settings

Windows initialization files contain information that defines your Windows environment. Windows for Workgroups and Windows-based applications can use the information stored in these files to configure themselves to meet your needs and preferences.

There are two standard Windows initialization files:

  • WIN.INI, which primarily contains settings that Windows maintains to customize your Windows environment according to your preferences.
  • SYSTEM.INI, which primarily contains settings that customize Windows to meet your system's hardware needs.

This document describes only a few of the settings in the WIN.INI file. You can get a more complete listing of the WIN.INI settings by purchasing the Windows for Workgroups Resource Kit for the Microsoft Windows Operating System Version 3.1. The Windows for Workgroups Resource Kit provides complete technical information about Windows for Workgroups for the support professional. It includes a technical reference manual and a disk containing helpful utilities, system- resource viewers, drivers, and accessories.

To order the Windows for Workgroups Resource Kit within the United States, call (800) 642-7676.

To order outside of the United States, dial the phone number for your area. You can find this number on the International Subsidiary card.

Format of the WIN.INI File

The WIN.INI file contains several sections, each of which consists of a group of related settings. The sections and settings are listed in the WIN.INI file in the following format: 

   [section name]
   keyname=value
In this example, [section name] is the name of a section. The square brackets ([ ]) are required, and the left bracket must be in the leftmost column on the screen.

The keyname=value statement defines the value of each setting. A keyname is the name of a setting. It can consist of any combination of letters and digits in uppercase or lowercase, and it must be followed immediately by an equal sign (=). The value can be an integer, a string, or a string enclosed in quotation marks, depending on the setting.

You can include comments in initialization files. You must begin each line of a comment with a semicolon (;).

Updating WIN.INI from Previous Versions of Windows

If you update your system to Windows for Workgroups version 3.1 from Windows version 3.0, Setup automatically updates your WIN.INI file by making the following changes. For detailed information about these settings, refer to the Windows for Workgroups Resource Kit.

In the [windows] section, Setup adds three new settings: 

   KeyboardDelay=
   ScreenSaverTimeout=
   DosPrint=
If the following settings are already present in the 3.0 version of the WIN.INI file, Setup does not change them. If they are not present, Setup adds them: 

   Device=
   Documents=
   Programs=com exe bat pif
In the [extensions] section, Setup adds one new setting: 

   bmp=pbrush.exe ^.bmp
Setup adds two other settings to the [extensions] section, if they are not already present in the 3.0 version of the WIN.INI file: 

   pcx=pbrush.exe ^.pcx
   rec=recorder.exe ^.rec
In the [ports] section, Setup adds: 

   LPT1.DOS
   LPT2.DOS
Setup adds three other settings to the [ports] section, if they are not already present in the 3.0 version of WIN.INI: 

   FILE:
   COM3:=9600,n,8,1,x
   COM4:=9600,n,8,1,x
Setup adds the following section and settings to support TrueType fonts: 

   [FontSubstitutes]
   Helv=MS Sans Serif
   Tms Rmn=MS Serif
   Times=Times New Roman
   Helvetica=Arial
Setup adds the following sections and settings to support multimedia: 

   [mci extensions]
   wav=waveaudio
   mid=sequencer
   rmi=sequencer
Setup adds the following sections and settings to support sound: 

   [sounds]
   SystemDefault=ding.wav, Default Beep
   SystemExclamation=chord.wav, Exclamation
   SystemStart=tada.wav, Windows Start
   SystemExit=chimes.wav, Windows Exit
   SystemHand=chord.wav, Critical Stop
   SystemQuestion=chord.wav, Question
   SystemAsterisk=chord.wav, Asterisk
Setup adds the following section and settings to support object linking and embedding: 

   [embedding]
   SoundRec=Sound,Sound,SoundRec.exe,picture
   Package=Package,Package,packager.exe,picture
   PBrush=Paintbrush Picture,Paintbrush Picture,pbrush.exe,picture
Setup also makes additional changes, depending on the applications and devices installed on your system.

How to Read this Document

In this document, WIN.INI settings are listed alphabetically within sections. However, the settings do not appear alphabetically in the WIN.INI file. To change a setting, you need to search for it within the appropriate section.

This document lists the syntax, default value, purpose, and recommended method for changing each setting, using the following format.

SettingName=<value-type> 

 Default:   The Windows default value for this setting.

 Purpose:   This paragraph briefly describes the function of the setting
                and its default value (if applicable).

 To change: Describes the recommended method for changing the value
                of this setting.
<value-type> indicates whether the value should be an integer, a letter, a range of numbers, or something else.

Changing Settings

When the Setup program creates the WIN.INI file, it assigns default values to the settings. Some settings that are listed in this document may not appear in your WIN.INI file.

There are two ways to change WIN.INI settings:

  • You can use Control Panel to change most settings. This is the safest and most recommended way because there is no need to open and edit the WIN.INI file, where it is easier to make mistakes. For more information about Control Panel, see Chapter 9, "Customizing Windows for Workgroups," in the Microsoft Windows for Workgroups User's Guide.
  • You can use a text editor, such as Notepad, to edit the WIN.INI file directly. (Do not use a formatting editor, such as Write; it can corrupt your WIN.INI file.) You must use this method to change the settings that you cannot change by using Control Panel. After you have edited the WIN.INI file, you must restart Windows for Workgroups for the settings to take effect. For more information about Notepad, see Help for Notepad.

Caution: Always back up your WIN.INI file before you make changes, so that you can restore the original file in case you accidentally damage the WIN.INI file or make changes that cause problems when running Windows for Workgroups. It is recommended that you do not change any settings that are not described in this document. However, if you need to change additional settings, refer to the Windows for Workgroups Resource Kit. Be careful when using a text editor to edit the WIN.INI file. Incorrect changes to WIN.INI can cause unexpected results when you run Windows for Workgroups.

[windows] Section Settings

The [windows] section contains settings that affect general areas of your Windows environment, such as which applications run when you start Windows for Workgroups and how information appears on your screen.

The [windows] section can contain the following settings.

DoubleClickHeight=<pixels> 

 Default:   4

 Purpose:   Specifies the height (in pixels) that the mouse
                pointer can move between clicks when you double-click.
                If the mouse pointer is moved further up or down, the
                two clicks are treated as separate single clicks. For
                example, if DoubleClickHeight=10, the mouse pointer
                cannot move vertically more than 5 pixels between
                clicks in order for the two clicks to be recognized as
                a double-click. If you use an odd number, it is
                rounded up to the nearest even number. This setting is
                helpful if you are using a pen-tablet pointing device.

 To change: Use Notepad to edit the WIN.INI file.
DoubleClickWidth=<pixels> 

 Default:   4

 Purpose:   Specifies the width (in pixels) that the mouse pointer can
                move between clicks when you double-click. If the
                mouse pointer is moved further right or left, the two
                clicks are treated as separate single clicks. For
                example, if DoubleClickWidth=10, the mouse pointer
                cannot move horizontally more than 5 pixels between
                clicks in order for the two clicks to be recognized as
                a double-click. If you use an odd number, it is
                rounded up to the nearest even number. This setting is
                helpful if you are using a pen-tablet pointing device.

 To change:    Use Notepad to edit the WIN.INI file.
Load=<filename(s)> 

 Default:   None

 Purpose:   Specifies one or more applications to run as icons when
                Windows for Workgroups is started. This value is a
                list of one or more filenames of applications, or
                documents that are associated with an application,
                each separated by a space. Specify the complete path
                if the application or document is not located in the
                Windows directory.

 To change:    Add the application to the StartUp group in Program
                Manager, and then select the Minimize On Use check box
                in the Properties dialog box.
MenuDropAlignment=<0-or-1> 

 Default:   0

 Purpose:   Specifies whether menus open right-aligned or left-aligned
                with the menu title. If this setting is 0, menus open
                so that they are left-aligned. If it is 1, menus open
                so that they are right-aligned.

 To change: Use Notepad to edit the WIN.INI file.
MenuShowDelay=<milliseconds> 

 Default:   0 for 80386 computers; 400 for 80286 computers

 Purpose:   Specifies how long Windows waits before displaying a
                cascading menu.

 To change: Use Notepad to edit the WIN.INI file.
Programs=<extensions> 

 Default:   com exe bat pif

 Purpose:   Defines which files Windows considers applications. A
                filename extension is separated by a space and does
                not include the preceding period.

 To change: Use Notepad to edit the WIN.INI file.
Run=<filename(s)> 

 Default:   None

 Purpose:   Causes Windows for Workgroups to run one or more specified
                applications when it is started. The value is a list
                of one or more filenames of applications, or documents
                associated with applications, each separated by a
                space. Specify the complete path if the application or
                document is not located in the Windows directory.

 To change: Add the application to the StartUp group in Program
                Manager.

[desktop] Section Settings

The [desktop] section contains optional settings that control the appearance of the screen background (desktop) and the positioning of windows and icons on the screen. Most of these settings (which are not listed in this document) can be changed by using Control Panel. The following setting must be changed by editing the WIN.INI file.

IconVerticalSpacing=<pixels> 

 Default:   Windows determines the default value based on the icon title
                font and the display adapter you are using.

 Purpose:   Specifies the number of pixels that appear vertically
                between icons. Increasing this number increases the
                amount of vertical space between icons.

[fonts] Section Settings

The [fonts] section describes one or more font files that are loaded when Windows for Workgroups is started.

The [fonts] section can contain one or more occurrences of the following setting.

<font-name>=<font-file> 

 Purpose:   Specifies a font file. The <font-name> keyname is the
                descriptive name of a font. The <font-file> value is
                the filename of a file that contains font resources.

 To change: In the Control Panel window, choose the Fonts icon.

[mci extensions] Section Settings

The [mci extensions] section contains settings that associate different types of media files with different Media Control Interface (MCI) device drivers. Whenever a media file is selected, Windows uses the associated driver to play it.

The [mci extensions] section can contain one or more occurrences of the following setting.

<extension>=<mci-device-type> 

 Purpose:   Associates files that have the specified extension with the
                specified MCI device driver. Windows uses the
                specified driver to play the media file associated
                with it.

 To change: Use Notepad to edit the WIN.INI file.

[Windows Help] Section Settings

The [Windows Help] section includes settings that specify the size and placement of the Help window and dialog boxes, in addition to the color of text that, when chosen, displays a macro, pop-up window, or new Help window.

The [Windows Help] section can include the following settings.

JumpColor=<red-value> <green-value> <blue-value> 

 Purpose:   Specifies the color of text that, when chosen, leads to a
                new window of Help information. For example,
                specifying 000 000 000 as values results in black text
                on a white background.

 To change: Use Notepad to edit the WIN.INI file.
Note: If no PopupColor value is specified, the JumpColor also applies to text that, when chosen, displays a pop-up window.

PopupColor=<red-value> <green-value> <blue-value> 

 Purpose:   Specifies the color of text that, when chosen, displays a
                pop-up window (the type of window used for glossary
                definitions). For example, specifying 000 000 000 as
                values results in black text on a white background.

 To change: Use Notepad to edit the WIN.INI file.
MacroColor=<red-value> <green-value> <blue-value> 

 Purpose:   Specifies the color of text that, when chosen, runs a
                Help macro.

 To change: Use Notepad to edit the WIN.INI file.
IFJumpColor=<red-value> <green-value> <blue-value> 

 Purpose:   Specifies the color of text that, when chosen, leads to a
                new window of Help information, located in a different
                Help file.

 To change: Use Notepad to edit the WIN.INI file.
IFPopupColor=<red-value> <green-value> <blue-value> 

 Purpose:   Specifies the color of text that, when chosen, displays a
                pop-up window (the type of window used for glossary
                definitions), located in a different Help file.

 To change: Use Notepad to edit the WIN.INI file.

KBCategory: kbref kbdisplay kbsound
KBSubcategory:
Additional reference words: 3.10 wfw wfwg

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 22, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.