File Manager Formats 512 Bytes Per Sector Geometry Only

Last reviewed: November 21, 1994
Article ID: Q94963
The information in this article applies to:
  • Microsoft Windows operating system versions 3.0, 3.0a, 3.1, 3.11

SUMMARY

File Manager can format a hard disk drive partition only if the hard disk drive geometry supports 512 bytes per sector. You cannot use File Manager to format other hard disk drive metrics (such as 1024 bytes per sector).

MORE INFORMATION

If you are unsure what your hard disk drive geometry is, you can find out by using the Microsoft Diagnostics (MSD) utility, which ships with Windows. To do this, type "msd" (without the quotation marks) at the command prompt and then choose Disk Drives from the Main menu.

NOTE: File Manager does not rely on the MS-DOS FORMAT command to perform its disk formats. (It does not rely on any MS-DOS command to perform disk functions.)


KBCategory: kbusage kbother
KBSubcategory: win31
Additional reference words: 3.00 3.00a 3.10 3.11


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.