WFWG: System Hangs with Novell NetWare and Token Ring

Last reviewed: November 21, 1994
Article ID: Q95116

The information in this article applies to:

Microsoft Windows for Workgroups versions 3.1, 3.11

SYMPTOMS

When you copy files to a Novell NetWare file server using Windows for Workgroups with NetWare Connectivity and the IBM Token Ring 4/16 network adapter, the system may stop responding (hang) and/or files may become corrupted.

Symptoms may include system hangs when copying files to a NetWare server from the Windows for Workgroups File Manager or from an MS-DOS command prompt (either inside or outside Windows).

WORKAROUND

To work around these problems:

Windows for Workgroups 3.1

Use the Advanced Card Settings option in Control Panel to increase the number of transmit buffers and the transmit and receive buffer sizes.

Windows for Workgroups 3.11

Use the Network Setup icon in the Network group to increase the number of transmit buffers and the transmit and receive buffer sizes.

MORE INFORMATION

The default values for the number of transmit buffers and the transmit and receive buffer sizes may not be large enough for some IBM Token Ring configurations, particularly those running at 16 Mbps.

The Token Ring specifications define a maximum length of time any adapter can hold the token. This, along with the hardware capabilities of the Token Ring adapter, determine the buffer sizes you should use. The following are valid ranges for RECVBUFSIZE and XMITBUFSIZE:

   Adapter                            Range
   --------------------------------------------

   4 Mbs Adapter                      256-2040
   4/16 Adapter Running at 4Mb        256-4096
   4/16 Adapter Running at 16Mb       256-17952

Use the Advanced Card Settings option in Control Panel to change the settings as follows:

   XMITBUFS=2         (default is 1, maximum is 2)
   XMITBUFSIZE=1024   (default is 256, recommended is 2040)
   RECVBUFSIZE=1024   (default is 256, recommended is 2040)

For additional information about the meaning and use of these buffer sizes, query on the following words here in the Microsoft Knowledge Base:

   tuning and lm and token-ring

REFERENCES

"LAN Manager Installation and Configuration Guide" for version 2.2, pages 211-213

KBCategory: kbnetwork kb3rdparty kbprb
KBSubcategory: wfw wfwg
Additional reference words: 3.10 3.11 nic tokenring freeze lock up lockup
3rdparty

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.