DEC Network Interface Card Naming Conventions

Last reviewed: November 21, 1994
Article ID: Q95883
The information in this article applies to:
  • Microsoft Windows for Workgroups version 3.1

SUMMARY

This article describes the naming conventions for network interface cards (NICs) manufactured by Digital Equipment Corporation (DEC). These conventions are used to identify various information about the network cards, including the class, architecture, and connections of the card.

MORE INFORMATION

DEC NICs are stamped with a product number on the bracket. (For example, the DEC Etherworks Turbo/TP has the product number DE201.) This number is visible from the back of the computer. The meaning of the different name and number mappings are as follows:

   DE10x - Etherworks LC
   DE20x - Etherworks Turbo
   DE21x - Etherworks MC

NOTE: "DE" indicates a DEC Etherworks card.

The number in the first position (1, 2, or 4) indicates the class of the network card. The classes are as follows:

   1 - Standard
   2 - Turbo
   4 - EISA

The number in the middle position (0, 1, or 2) indicates the bus architecture as follows:

   0 - ISA
   1 - Microchannel
   2 - EISA

The number in the last position ("x") indicates the type of connectors on the card and the card name as follows:

   0 - AUI and BNC
   1 - AUI and TP
   2 - BNC and TP

Originally, DEC manufactured a card with the name "DEPCA." This card was an 8-bit net/mouse full-length card. It had a connector for the mouse and a BNC connector only for the network connection on the card.

Since this card was produced, all network cards subsequently produced by DEC have been supersets of this original DEPCA card. These cards all use the same NDIS driver (DEPCA.DOS) and therefore have been erroneously called "DEPCA" cards. All DEC cards excluding the original DEPCA card has been given a product name and a product number as described above.

For additional information, contact Digital Equipment Corporation Technical Support at (800) 332-8000.

The products included here are manufactured by Digital Equipment Corporation, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.


KBCategory: kbnetwork kbhw kb3rdparty
KBSubcategory: wfw wfwg
Additional reference words: 3.10 3rdparty interface
depka de2o de1o thinnet twisted pair


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.