WFWG: Cannot See Workstations When Using Tiara NIC

Last reviewed: November 21, 1994
Article ID: Q95993

The information in this article applies to:

Microsoft Windows for Workgroups version 3.1

SUMMARY

According to Tiara technical support, the TNDIS driver has not been tested with any of the Lancard E/16PC TP (lattice net based) network interface cards (NICs).

The Lancard E/16PC TP has a PWA number on the card. If the last six digits are in the range 000000 to 000004, it is a lattice net based card and incompatible with Windows for Workgroups.

If you try to use this card with Windows for Workgroups, you may be unable to see or use other workstations, but no error messages appear.

MORE INFORMATION

For more information, contact Tiara technical support.

The Tiara products included here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

KBCategory: kbnetwork kb3rdparty kbhw
KBSubcategory: wfw wfwg
Additional reference words: 3.10 NIC 3rdparty

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.