Can't Find "drivername=PCNIC$" in PROTOCOL.INILast reviewed: November 21, 1994Article ID: Q97487 |
The information in this article applies to:
The following article contains information on the use of Windows for Workgroups with third-party products or configurations that have not been tested and are not supported by Microsoft. If the steps or procedures described in this article do not function properly, contact the manufacturer of the third-party product for more information or use a supported configuration.
SYMPTOMSThe IMC PCNIC8 network interface card (NIC) made by ACS Telecom includes its own OEMSETUP.INF file. You may have problems when you try to install this NIC due to an error in the OEMSETUP.INF file. When you restart your computer, an error message appears stating that "drivername=PCNIC$" cannot be found.
CAUSEThis error is caused by an incorrect PROTOCOL.INI setting. After you install the driver for this NIC, the following is entered in the PROTOCOL.INI file:
[IMC$PCNIC8] drivername=PCNIC8$ WORKAROUNDThis setting should be changed as follows:
[IMC$PCNIC8] drivername=PCNIC$For more information, contact ACS Telecom. The product included here is manufactured by a vendor external to Microsoft; we make warranty, implied or otherwise, regarding this product's performance or reliability.
|
KBCategory: kbnetwork kbhw kb3rdparty kbsetup
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |