Cannot Print Reports from Device Manager

Last reviewed: August 21, 1995
Article ID: Q128240

The information in this article applies to:

Microsoft Windows 95

SYMPTOMS

When you try to print a report from Device Manager, nothing happens.

CAUSE

This problem can occur if you change the default printer while Device Manager is open.

RESOLUTION

To work around this problem, close Device Manager before you change the default printer. If you do change the default printer while Device Manager is open, exit and then restart Device Manager after you change the default printer.

STATUS

Microsoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

KBCategory: kbprint kbenv
KBSubcategory: wpp95 win95
Additional reference words: 95

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: August 21, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.