TCP/IP Requires Ethernet_II Frame Type for ODI DriverLast reviewed: September 7, 1995Article ID: Q129726 |
The information in this article applies to:
SYMPTOMSYou can use the Ping tool to ping your own computer, but you cannot access the network using the TCP/IP protocol. You may receive the following error message when you try to access the network:
Request timed out CAUSEThis problem can occur when you are using a Novell NetWare ODI driver and the Ethernet_II frame type is not listed in the proper NET.CFG file.
RESOLUTIONTo correct this problem, add Ethernet_II to the NET.CFG file. Make sure you edit the correct NET.CFG file--NET.CFG is usually read from the same directory as LSL.COM. Note that you should not make Ethernet_II the first frame type listed in the file. To add Ethernet_II to the NET.CFG file, follow these steps:
|
KBCategory: kbnetwork kbenv kb3rdparty
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |