Configuring IBM Token Ring Card to Handle Large PacketsLast reviewed: August 28, 1995Article ID: Q130821 |
The information in this article applies to:
SUMMARYThe maximum value you can set for the Receive Buffer Size setting for the IBM Token Ring 16/4 network adapter is 2040 bytes. However, you can configure the IBM Token Ring 16/4 network adapter to use a packet size larger than 2040 bytes by modifying the Receive Buffers setting.
MORE INFORMATIONTo configure the IBM Token Ring 16/4 network adapter to use a packet size larger than 2040 bytes, follow these steps:
If you set the Transmit Buffer Size setting to a value larger than 2040 bytes, you must configure the network adapter to receive packets of at least that size to communicate on the network.
|
KBCategory: kbnetwork kbenv kb3rdparty kbhw
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |