HyperTerminal Err Msg: The TAPI Configuration Has Changed...

Last reviewed: August 28, 1995
Article ID: Q131612

The information in this article applies to:

Microsoft Windows 95

SYMPTOMS

When you start a HyperTerminal connection, you receive the following error message:

   The TAPI configuration has changed and the modem/port selected for
   this session is no longer valid.

CAUSE

When you create a connectoid in HyperTerminal, it is associated with a particular modem on a particular port. If, after you create the connectoid, the modem is removed, you receive the error message stated above when you try to use the connection. This error message indicates that the modem associated with the connectoid has been removed, and that the system has identified a likely alternative.

RESOLUTION

Click OK to acknowledge the error message. There should be no effect on the connection if the connection is associated with a valid modem.

KBCategory: kbtool kberrmsg
KBSubcategory: wpp95 win95 wincomm
Additional reference words: 95

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: August 28, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.