No Duplex Printing on HP LaserJet 4+/4M+

 Last reviewed: August 21, 1995
Article ID: Q134453
The information in this article applies to:
  • Microsoft Windows 95

SYMPTOMS

There is no option for duplex printing in the properties for Hewlett- Packard (HP) LaserJet 4+ and 4M+ printers, although the printers themselves do support duplex printing.

CAUSE

Duplex printing is not supported in the Windows 95 drivers for these printers.

RESOLUTION

To resolve this issue, use either of the following methods:

  • Check with Hewlett-Packard about obtaining an updated Windows 95 driver for your printer.
  • Install a Windows 95 driver for a similar printer that does support duplex printing. 

        - For the HP LaserJet 4M+, use the PostScript driver for the same
      model.


        - For the HP LaserJet 4+, use the LaserJet 4Si driver.

KBCategory: kbprint kbhw
KBSubcategory: wpp95 win95
Additional reference words: 95

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: August 21, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.