Err Msg: Your Network Adapter HP27252 Is Not Configured...

Last reviewed: January 26, 1996
Article ID: Q135189

The information in this article applies to:

Microsoft Windows 95

SYMPTOMS

When you start Windows 95, you may receive the following error message:

   Your network adapter HP27252 is not configured correctly. You may need
   to set it up again.

If you click OK, Windows 95 starts normally and the network functions correctly.

CAUSE

This error message can occur if you are using a Hewlett-Packard HP27252 ISA Ethernet network adapter with NDIS3 drivers.

RESOLUTION

You can safely ignore the error message.

STATUS

Microsoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

MORE INFORMATION

The HP27252 ISA network adapter comes factory-configured to use automatic detection for the media type. To use NDIS2 drivers with this adapter when you are using the AUI media type, set the "AUI instead of TP?" setting to Yes.

KBCategory: kbnetwork kberrmsg kbbuglist
KBSubcategory: posfest win95 nethw
Additional reference words: 95

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: January 26, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.