CD-ROM Drive Not Recognized with BusLogic 946C SCSI Controller

 Last reviewed: September 20, 1995
Article ID: Q137012
The information in this article applies to:
  • Microsoft Windows 95

SYMPTOMS

After you install Windows 95 on a computer with a BusLogic 946C SCSI controller, you may experience either of the following problems:

  • The SCSI controller is not recognized by Windows 95.
  • Hard disks on the SCSI chain are recognized, but a CD-ROM drive on the chain is not recognized.

RESOLUTION

To resolve this problem, update the SCSI controller to firmware revision 4.22 and BIOS revision 4.86 or later. Please contact BusLogic for information about obtaining these upgrades.

MORE INFORMATION

You can use the BusLogic AutoSCSI tool included with the SCSI controller to determine the controller's version information. For information about this tool, please consult the controller's documentation.

The third-party product discussed in this article is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

KBCategory: kbhw
KBSubcategory: win95
Additional reference words: 95

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: September 20, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.