Digi ISDN Adapter Stops Working During 128K Connection

 Last reviewed: March 13, 1996
Article ID: Q148179
The information in this article applies to:
  • Microsoft Windows 95

SYMPTOMS

When you are running the ISDN Accelerator Pack for Microsoft Internet Explorer 2.0 with a Digi Datafire or PCIMAC ISDN adapter, the adapter may stop working while you are connecting to a server, while you are copying files, or within five minutes of connecting.

CAUSE

Digi ISDN adapters running at 128K do not connect reliably with servers using other manufacturers' adapters.

RESOLUTION

To work around this problem, change the connection speed from 128K to 64K by performing the following steps:

  1. In My Computer, double-click Dial-Up Networking.

  2. Use the right mouse button to click the connection, and then click Properties on the menu that appears.

  3. Click Configure.

  4. In the Speed Preference box, click 64K.

KBCategory: kbhw
KBSubcategory: win95
Additional reference words: 95 ndis wan

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 13, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.