Dialing with Eicon PCMCIA ISDN Adapter May Hang Computer

Last reviewed: March 19, 1996
Article ID: Q148680

The information in this article applies to:

Microsoft Windows 95

SYMPTOMS

When you attempt to dial using an Integrated Services Digital Network (ISDN) connectoid, your computer may stop responding (hang).

CAUSE

This problem can occur if you are using an Eicon PCMCIA ISDN adapter. The problem is caused by the hardware version of the adapter.

RESOLUTION

To resolve this issue, contact Eicon Technologies for an updated revision of the adapter.

KBCategory: kbhw
KBSubcategory: win95 dun wincomm
Additional reference words: 95 ndiswan diva diehl

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 19, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.