Adding the Telephony Icon to Control PanelLast reviewed: March 17, 1998Article ID: Q150280 |
95
WINDOWS
kbenv kbui kbusage
The information in this article applies to:
SUMMARYWindows 95 includes a telephony utility that can be run from Control Panel, but is not available by default. The telephony utility can be used for troubleshooting telephony-related issues.
MORE INFORMATIONTo add the Telephony icon to Control Panel, rename Telephon.cp$ in the Windows\System folder to Telephon.cpl, and then restart Control Panel. If you have a 16-bit Telephony application programming interface (TAPI) service provider already installed on your computer when you upgrade to Windows 95, you may experience problems with your 32-bit communication applications (such as HyperTerminal, Phone Dialer, and Dial-Up Networking). You can use the Telephony icon in Control Panel to determine if you have a 16-bit TAPI service provider installed and to remove your 16-bit TAPI service provider(s) to eliminate problems with 32-bit communication programs. However, removing your 16-bit TAPI service provider may prevent 16-bit TAPI-aware programs from functioning properly. If you are having TAPI-related problems, Microsoft recommends that you rebuild Telephon.ini using the steps outlined in the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q120221 TITLE : How to Rebuild the TELEPHON.INI FileIf you add and run the Telephony utility, you will most likely see the following telephony driver installed:
Unimodem Service ProviderThis is the Windows 95 32-bit TAPI service provider and should not be removed.
|
KBCategory: kbenv kbui kbusage
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |