Second Member of Mirror or Stripe Set Larger than First

Last reviewed: September 11, 1997
Article ID: Q101629

The information in this article applies to:
  • Microsoft Windows NT operating system, version 3.1
  • Microsoft Windows NT Advanced Server, version 3.1
  • Microsoft Windows NT workstation versions 3.5x
  • Microsoft Windows NT Server versions 3.5x
  • Microsoft Windows NT workstation versions 4.0
  • Microsoft Windows NT Server versions 4.0

When Windows NT creates a mirror set, stripe set, or stripe set with parity, the sizes of the disk partitions are approximately equal. Windows NT reserves some additional space for administrative data. However, when the disk geometry of the disk drives involved is not identical, the Disk Administrator rounds the size of the second member UP to the nearest cylinder boundary. Depending upon the controller used and BIOS settings this may make the size of the secondary member partition larger than the first partition. The extra space in the second partition is not used.

Some SCSI controller BIOS’s translate drives larger than 1GB to make 1 cylinders worth of data be equal to up to 8MB - in that case the rounding UP can make the secondary partition 8MB larger.

If the drive is not used for booting - translation is not necessary, and can be disabled to eliminate the 8MB rounding but the drive must be re- formatted after doing so.

Note that Windows NT Workstation does not support mirroring or stripe sets with parity.


Additional query words: prodnt
Keywords : ntfilesys kbother
Version : 3.1 3.5 3.51 4.0
Platform : winnt


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: September 11, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.