REG: CurrentControlSet Entries PART 3

Last reviewed: May 8, 1997
Article ID: Q102986
The information in this article applies to:
  • Windows NT operating system version 3.1
  • Windows NT Advanced Server version 3.1

The article contains REGISTRY entries for the CurrentControlSet\Control Subkeys Part 3:
  • Setup
  • TimeZoneInformation
  • VirtualDeviceDrivers
  • Windows
  • WOW

For listings of the other control subkeys under CurrentControlSet, see the articles:

CurrentControlSet Part 1, containing:

  • BootVerificationProgram
  • ComputerName
  • DisplayDriver
  • GroupOrderList
  • HiveList
  • KeyboardLayout
  • Lsa
  • NetworkProvider
  • Nls
  • PriorityControl
  • ProductOptions
  • ServiceGroupOrder

CurrentControlSet Part 2: Session Manager, containing entries for Session Manager.

CURRENTCONTROLSET\CONTROL SUBKEYS ENTRIES

This key contains parameters that control system startup, such as subsystems to load, the size and location of paging files, and so on.

NOTE: The system must be restarted for any changes in the Control key to take effect.

SETUP CONTROL ENTRIES

Default:   For an x86-based computer:
              keyboard=STANDARD
              pointer=msser
              video=VGA

The Setup subkey contains various information used by Windows NT Setup, under this Registry path:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Setup

The values are REG_SZ strings that are meaningful only to Setup, and which should be maintained by the system.

TimeZoneInformation Control Entries

Values in the TimeZoneInformation key should be maintained only by choosing the Date/Time icon in Control Panel or by applications using the Win32 APIs. Changing this information in the Registry can damage your system’s local time settings. The information is stored in the following Registry path.

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation

ActiveTimeBias   REG_DWORD
Default:   0x1a4

For example, for the Pacific Time Zone, the value of ActiveTimeBias should change from 1e0 to 1a4 on the first Sunday in April.

Bias REG_DWORD

Default:   0x1e0

DaylightBias   REG_DWORD
Default:   0xffffffc4

DaylightName   REG_SZ
Default:   (user selection)

DaylightStart   REG_BINARY

StandardBias   REG_DWORD

StandardName   REG_SZ
Default:   (user selection)

StandardStart   REG_BINARY

VirtualDeviceDrivers Control Entries

The VirtualDeviceDriver key contains a list of Win32 DLLs that serve as virtual device drivers (VDD). Each VDD entry results in loading that VDD when a virtual MS-DOS machine (VDM) is being created for running an application created for MS-DOS or 16-bit versions of Microsoft Windows. This is the Registry path:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\VirtualDeviceDrivers

VDD   REG_MULTI_SZ   Filenames
Default: None-the Windows NT VDDs are built into the system.

Specifies valid Win32 DLLs that are virtual device drivers.

Windows Startup Control Entries

This key contains entries that define the system directories for the Win32 subsystem (32-bit Windows) under this path:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

Directory   REG_EXPAND_SZ   Directory name
Default: %SystemRoot%

Defines the directory for Windows NT.

SystemDirectory   REG_EXPAND_SZ   Directory name
Default: %SystemRoot%\system32

Defines the directory for the Windows NT system files.

The Registry entries for starting the Win32 subsystem are defined under the Required and Windows value entries in the Session Manager\Subsystem key, as described in the article "CurrentControlSet Part 2: Session Manager."

WOW Startup Control Entries

The following values control startup parameters that affect MS DOS-based applications and applications created for 16-bit Windows 3.1. The Registry path for these values is the following:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WOW

Cmdline   REG_EXPAND_SZ   Path and switches

Defines the commmand line that runs when an MS-DOS-based application runs under Windows NT. This command line continues to run until the related application is closed. The following switches can be included:

   Switch   Meaning
   ----------------
   -a       Specifies a command to pass to the VDM
   -f       Specifies the directory to find NTVDM.EXE
   -m       Hides the VDM console window
   -w       Specifies the WOW VDN

Default: %SystemRoot%\system32\ntvdm -f%SystemRoot%\system32 -a

KnownDLLs   REG_SZ   DLL filenames
Default: shell.dll commdlg.dll mmsystem.dll olecli.dll olesvr.dll ddeml.dll win87em.dll toolhelp.dll lanman.drv netapi.dll pmspl.dll wowdeb.exe

Defines a list of known DLLs for use by the WOW VDM that provide compatibility for non-Win32 applications. When the system searches for DLLs to load, it compares the requested DLL with those in the KnownDLLs list and then loads the matching DLL from the SystemRoot\SYSTEM32 directory.

If you want to replace a DLL, you must delete the name from this list, so that the system will search elsewhere for the DLL. The files USER.DLL, GDI.DLL, and SYSTEM.DRV are not included in this list, because these are required Windows NT system files and their location cannot be changed.

LPT_timeout   REG_SZ   Number of seconds
Default: 15

Defines how many seconds after the LPT port has been used that Windows NT waits before grabbing the port, closing it, and flushing the output. This value should only be needed for MS-DOS-based applications that use BIOS and do not close the port.

Size   REG_SZ   Number in megabytes
Default: 0

Defines the amound of memory to be given to each individual MS-DOS VDM. The default of 0 gives the VDM as uch memory as Windows NT determines is necessary, depending upon the memory configuration.

To change this value, change the related value in the PIF file for the application.

Wowcmdline   REG_EXPAND_SZ   Path and switches
Default: %SystemRoot%\system32\ntvdm -m -w -f%SystemRoot%\system32
   -a %SystemRoot%\system32\krnl386

Defines the command line that runs when a 16-bit Windows-based application is started. The switches instruct Windows NT to start either an MS-DOS VDM or a WOW VDM. See the definitions for allowable switches under Cmdline.

Wowsize   REG_SZ   Up to 16 megabytes
Default: Depends on RISC-based computer’s system memory

For RISC-based computers, defines the amount of memory provided in a VDM when a WOW session is started.This value is not used on x86-based computers, where Windows NT allocates the memory needed when it is asked for.

The default size chosen for a RISC-based computer depends on the amount of system memory on the computer. For each MB specified, the system uses 1.25 MB, so setting Wowsize to 4 MB causes the VDM to allocate 5 MB, although applications can only use 4 MB. You can override the following defaults:

   System memory size        Default VDM size
   ------------------------------------------
   Less than 12 MB (small)   3 MB
   12-16 MB (medium)         6 MB
   More than 16 MB (large)   8 MB

CAUTION: Setting Wowsize to a value lower than 3 MB causes most applications to fail.

Reference: "The Windows NT Resource Kit for Operating System Version 3.1".


Additional query words: prodnt
Keywords : kbother ntregistry
Version : 3.1
Platform : WINDOWS


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: May 8, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.