IPCONFIG Diagnostic Utility: Parameters and UsageLast reviewed: November 6, 1997Article ID: Q117662 |
The information in this article applies to:
SUMMARYIPCONFIG.EXE is a new utility included with Windows NT 3.5 Workstation and Server. The purpose of this utility is to provide the user with diagnostic information related to TCP/IP network configuration. IPCONFIG also accepts various Dynamic Host Configuration Protocol (DHCP) commands, allowing a system to update or release its TCP/IP network configuration.
MORE INFORMATIONusage: IPCONFIG [/? | /all | /release [adapter] | /renew [adapter]]
/? Display this help message. /all Display full configuration information. /release Releases the IP address for the specified adapter. /renew Renews the IP address for the specified adapter.With no parameters, IPCONFIG will display only the IP address, subnet mask and default gateway for each adapter bound to TCP/IP. With the /all switch, IPCONFIG will display all the current TCP/IP configuration values including the IP address, subnet mask, default gateway and Windows Internet Naming Service (WINS) and DNS configuration. If adapter name is not specified with either the /Release or /Renew switch, then the IP address leases for all adapters bound to TCP/IP will be released or renewed. NOTE: The /Release and /Renew switches can only be used on a system that is configured with DHCP.
|
Additional query words: prodnt IP
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |