Microcom 4232 Modem Connects at 9600 Baud OnlyLast reviewed: September 23, 1996Article ID: Q119866 |
The information in this article applies to:
SYMPTOMSWhen you use Remote Access Service (RAS) with a Microcom 4232 v.32 bis modem connected to a Digiboard PC/16XEM, client machines, including computers with Windows for Workgroups version 3.11 installed, can connect only with the baud rate of 9600 baud.
WORKAROUNDYou can work around this problem by doing one of the following:
STATUSMicrosoft has confirmed this to be a problem in Windows NT and Windows NT Advanced Server version 3.1 and Windows NT Workstation and Windows NT Server version 3.5. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
|
Additional reference words: wfw wfwg prodnt 3.10 3.50
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |