NWLink with Ethernet_II Frame Type Corrupt Packets

Last reviewed: April 7, 1997
Article ID: Q120493

The information in this article applies to:
  • Microsoft Windows NT operating system version 3.1
  • Microsoft Windows NT Advanced Server version 3.1
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5
  • Microsoft Windows for Workgroups version 3.11
  • Microsoft Windows NT Server version 4.0
  • Microsoft Windows NT Workstation version 4.0

SYMPTOMS

A Windows for Workgroups 3.11 client can experience data corruption if you use IPX/SPX Compatible Transport with NetBIOS and an Ethernet_II (DIX) frame type to connect it to any of these network servers:

  • Windows for Workgroups 3.11 (ie: a peer server)
  • Windows NT Server version 3.5
  • Windows NT Workstation version 3.5
  • Windows NT version 3.1
  • Windows NT Advanced Server version 3.1

After you log on to the server, incorrect file information appears when you attempt to do a NET USE from an MS-DOS prompt or try to connect to the server from File Manager.

This problem occurs only when the Windows for Workgroups version 3.11 client was installed from the Windows NT Server version 3.5 CD-ROM.

CAUSE

Incorrect file information appears because the NWLINK.386 component for Windows for Workgroups version 3.11 is not handling the Ethernet_II (DIX) packet correctly.

WORKAROUND

To work around this problem:

  • Use DirectHost IPX instead of IPX/SPX Compatible Transport with NetBIOS.

    -or-

  • Use a Frame type other than Ethernet_II, for example, 802.3 Ethernet.

STATUS

Microsoft has confirmed this to be a problem in Windows NT and Windows NT Advanced Server version 3.1, and Windows NT Workstation and Server versions 3.5, 3.51, and 4.0. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.


Additional query words: prodnt wfw wfwg nwlink
Keywords : kbbug3.50 kbnetwork ntinterop ntprotocol NTSrvWkst
Version : 3.5 4.0
Platform : WinNT


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: April 7, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.