DEC Mylex SWXCR Raid Controller Software Causes STOP 0x0A

 Last reviewed: October 12, 1994
Article ID: Q121519
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5

SYMPTOMS

When you run Digital Equipment Corporation (DEC) 3-channel Mylex SWXCR Raid Controller Manager (SWXCRMGR.EXE) or Monitor (SWXCRMON.EXE) programs followed by the Disk Administrator program in Windows NT Server 3.5, the following STOP message may appear: 

   STOP: 0x0000000A

WORKAROUND

To work around this problem, run the Disk Administrator program before you run the SWXCR Raid Controller Manager or Monitor programs. For additional information, call DEC Technical Support at (800) 354-9000.

The DEC products discussed here are manufactured by Digital Equipment Corporation, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Additional reference words: prodnt 3.50
KBCategory: kbhw kb3rdparty
KBSubCategory: nthw

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: October 12, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.