ATI Video Fails with Adaptec 2940 SCSI Adapter on PCI Bus

Last reviewed: July 14, 1995
Article ID: Q122387
The information in this article applies to:
  • Microsoft Windows NT Workstation versions 3.5 and 3.51
  • Microsoft Windows NT Server versions 3.5 and 3.51

SYMPTOMS

If a Windows NT computer has an ATI video adapter and an Adaptec 2940 SCSI controller on a PCI bus, you may experience the following behavior depending on which ATI video driver is installed:

   Video Driver     Behavior
   ---------------------------------------------------------------------
   ATI Mach 64 GX   When you select the Display icon in Control Panel, the
                    following error message appears:

                       WARNING: The Application got invalid data from the
                       display driver. You used the down level graphic
                       adapter driver. Contact the manufacturer for the
                       current one.

   ATI Graphics     The system intermittently stops responding (hangs) or
   Pro Turbo        displays garbled output at the logon screen.

   ATI Mach64 PCI   The system hangs when you attempt to copy several large
                    files (totaling several megabytes).

RESOLUTION

To correct these problems, do one of the following:

  • Switch PCI expansion slot locations for the ATI video adapter and the Adaptec 2940 SCSI controller.
  • Contact Adaptec technical support at (800) 959-7274 for the latest ROM BIOS for the Adaptec 2940 SCSI controller (dated April 1994 or later).
  • Contact ATI Technical Support at (905) 882-2626 to verify that you have the latest ATI chip set number on the video card. ATI has reported that there are problems with video cards within a certain range of chip set numbers.

The products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.


Additional reference words: prodnt 3.50 3.51 aha 3rdparty
KBCategory: kb3rdparty kbhw
KBSubcategory: nthw


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: July 14, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.