Stop 0xA When Upgrading to Windows NT 3.5 with HP 2724xx NICs

Last reviewed: May 18, 1995
Article ID: Q122647
The information in this article applies to:
  • Microsoft Windows NT Server version 3.5

SYMPTOMS

After you upgrade a from Windows NT Advanced Server 3.1 to Windows NT Server 3.5, the following STOP message may appear after you enter the logon password:

   STOP 0x0000000A

This problem occurs when the computer you are upgrading is using a Hewlett- Packard (HP) 27246A MC LAN Adapter/16 TP or an HP 27247B PC LAN Adapter/16 TP.

CAUSE

This problem is caused by an older HP adapter driver that is not compatible with Windows NT version 3.5. The driver is not upgraded by default.

RESOLUTION

To correct this problem:

  1. Turn off the computer and remove the HP 27246A or HP 27247B network adapter card.

  2. Start Windows NT version 3.5 and log on as Administrator.

  3. Run Control Panel and choose Network.

  4. Remove the currently installed HP network adapter driver.

  5. Choose the Add Adapter button and select the HP 27246A MC LAN Adapter/16 TP for MCA-bus computers or HP27247B PC LAN Adapter/16 TP for ISA-bus computers.

  6. Choose the Continue button.

  7. When you are prompted for the path, specify the following directory on the Windows NT Server or Workstation version 3.5 CD:

          \DRVLIB\NETCARD\X86\HPMCA (for Intel-based systems and HP 27246A
          MC LAN Adapter/16 TP)
    

          -or-
    

          \DRVLIB\NETCARD\X86\HPISA (for Intel-based systems and HP 27247B
          PC LAN Adapter/16 TP)
    

  8. Shut down your computer, and then restart it.

The HP 27246A and 27247B network adapters are manufactured by Hewlett- Packard, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.


KBCategory: kb3rdparty
KBSubcategory: nthw ntdriver ntstop
Additional reference words: prodnt 3.50 trap 0x0A


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: May 18, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.