Event Viewer Messages for the Olicom Network CardLast reviewed: July 24, 1996Article ID: Q122933 |
The information in this article applies to:
SUMMARYAll error messages and/or warnings posted by the Olicom MAC driver have the Source field set to "OcTk16" or "OcTk32" depending on the adapter installed. System error messages, related to the Olicom MAC driver, may occur with different source names, i.e. "Service Control Manager". The messages are enumerated by the Event field and are described below in Event number order. You can display the message description, by highlighting the message and pressing ENTER.
MORE INFORMATION
Event Description
1 Bring-up diagnostics failed for OcTk1601.
Action: The adapter failed during the bring-up diagnostics. Shut down
your system and retry the operation. If the error persists, contact
your place of purchase.
2 Adapter initialize failed for OcTk1601.
Action: The adapter failed the initialization phase. Shut down your
system and retry the operation. If the error persists, contact your
place of purchase.
3 Adapter Check on OcTk1601.
Action: A serious error occurred on the adapter, causing an Adapter
check code to be posted. Restart your system. If the error persists,
contact your place of purchase.
4 Could not open adapter OcTk1601. Ring beaconing. Check network
speed settings.
Action: The network speed settings is wrong. Change it and restart your
system.
5 Could not open adapter OcTk1601. Duplicate node address.
Action: A duplicate address has been discovered on the ring. Change your
locally administered address and restart your system.
6 Could not open adapter OcTk1601. Request initialisation failed.
Action: An error occurred during adapter initialisation. Restart your
system. If the error persists, contact your place of purchase.
7 Could not open adapter OcTk601. Remove station received.
Action: The adapter has been removed by a LAN Manager station. Contact
your network administrator.
8 Could not open adapter OcTk1601.
Action: The adapter failed to open. Please check cables and connections
and retry the operation.
9 Could not download code on adapter OcTk1601.
Action: The download operation failed. Contact your place of purchase.
10 Lobe wire fault detected by OcTk1601. Please check cable
connections.
Action: Check all cables and connections and try another lobe media
cable. Retry the operation.
11 OcTk1601 has failed the lobe wrap test resulting from the beacon
auto-removal process and has deinserted from the ring.
Action: The adapter has deinserted from the ring, because the ring was
beaconing. Check the network speed settings and cable connections and
retry the operation. If the persists, contact your network
administrator.
12 OcTk1601 has received a remove ring station Mac frame request and
has deinserted from the ring.
Action: The adapter has been removed by a LAN Manager station. Contact
your network administrator.
13 The detected adapter for OcTk1601 is not supported by this driver.
Action: You have installed a wrong MAC driver for the adapter used.
14 The configuration read for OcTk1601 is invalid.
Action: A configuration entry is invalid. Use the network control panel
to setup proper adapter settings.
15 OcTk1601 has received a Trace Tool Remove frame from a Network
Management station and has disabled the packet filter.
Action: The adapter driver has cleared the PROMISCUOUS packetfilter bit,
as instructed by a LAN Manager station. Contact your network
administrator.
5000 OcTk1601 : Has encountered a conflict in resources and could not
load.
Action: Check the resources used by the network adapter(s) ensure, that
no conflicts exists.
5001 OcTk1601 : Could not allocate resources necessary operation.
Action: The driver failed to load, because it tried to allocate too many
resources. Decrease the number of receive and/or transmit buffers and
retry the operation.
5002 OcTk1601 : Has determined that the adapter is not functioning
properly.
Action: The adapter could not be found or is not properly. Check I/O
base settings and retry the operation.
5003 OcTk1601 : Could not find an adapter.
Action: The adapter could not be found by the MAC driver. Check I/O base
settings and retry the operation.
5004 OcTk1601 : Could not connect to the interrupt number.
Action: The interrupt is already used by another device. Change the
adapter interrupt number and retry the operation.
5005 OcTk1601 : Has encountered an internal error and has failed.
Action: An internal error has been discovered. Contact yourplace of
purchase.
5006 OcTk1601 : The version number is incorrect for this driver.
Action: The driver version is incorrect. Contact your placeof purchase.
5007 OcTk1601 : Timed out during an operation.
Action: A time-out error occurred. Contact your place of purchase.
5008 OcTk1601 : Has encountered an invalid network address.
Action: An invalid network address was specified. Change the locally
administered network address and restart your system.The driver uses
the burned-in address when loading.
5009 OcTk1601 : Does not support the configuration supplied.
Action: An invalid configuration entry was discovered. Use the network
control panel to set proper adapter parameters.
5010 OcTk1601 : The adapter has returned an invalid value to the
driver.
Action: An internal error has occurred. Contact your place of purchase.
5011 OcTk1601 : A required parameter is missing from the Registry.
Action: A parameter necessary for operation has been omitted in the
Registry. Use the network control panel to set properparameters.
5012 OcTk1601 : The IO Base Address supplied does not match the jumpers
on the adapter.
Action: The adapter could not be found by the MAC driver. Check I/O base
settings and retry the operation.
5014 OcTk1601 : The adapter is disabled. The driver cannot open the
adapter.
Action: Make sure the startup parameter for the Olicom Token Ring
adapter driver is set to "Manual". Use the "Devices" applet in the
control panel to change the settings.
5015 OcTk1601 : There is an I/O port conflict.
Action: The ports used by the MAC driver is already in use by another
device. Change the I/O Base address for the adapter.
5016 OcTk1601 : There is an I/O port or DMA channel conflict.
Action: Check the I/O port and DMA usage by the adapter to ensure that
there is no resource conflicts.
5017 OcTk1601 : There is a memory conflict at address xx.
Action: The MAC driver and another device could not share memory.
5018 OcTk1601 : There is a interrupt conflict at interrupt number xx.
Action: Change the interrupt selection on the adapter and retry the
operation.
5019 OcTk1601 : There is a resource conflict at DMA channel xx.
Action: Change the DMA channel selection on the adapter andretry the
operation.
If you experience any problems, you should write down the "Event ID",
"Source", "Description" and "Data" fields in the "Event Detail" window.
REFERENCESREADME.TXT in the \\DRVLIB\NETCARD\X6\OCTK16
|
Additional reference words: prodnt 3.50
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |