NEC 3X CD-ROM Drives Not SupportedLast reviewed: January 14, 1995Article ID: Q123277 |
The information in this article applies to:
The NEC Triple Spin (3x) CD-ROMs are not supported devices under Windows NT. Various problems may be encountered when using these devices with Windows NT, including file copy and setup problems. NOTE: The NEC CDR-500 (3Xi) and NEC CDR-600 (3Xe) are supported, but require updated firmware. Changing the operating mode may enable the device to function better under Windows NT. To do this change the default settings on the configuration switch block on the rear panel of the device. Switch number 3 should be set to the ON position. This changes the operating mode from SCSI II to SCSI I. Also, these devices should have at least firmware version 2.5. NOTE: Making these changes does not guarantee that the device will function correctly.
MORE INFORMATIONThese specific models of the NEC CD-ROMs are known to have problems with Windows NT.
Model 500 - 3XI Model 600 - 3XE Portable - 3XPAdditional problems may be encountered due to the media heating up during operation. When this happens the drive will no longer recognize the disk. The only work around is to remove the media and let it cool down. For additional information contact NEC Technical Support for CD-ROMs at (800) 388-8888. The NEC products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
|
KBCategory: kbhw kb3rdparty
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |