Olicom NIC Driver Does Not Install CorrectlyLast reviewed: December 7, 1994Article ID: Q123608 |
The information in this article applies to:
SYMPTOMSDuring the installation of the Olicom 16/4 network interface card (NIC), not all the files are copied over and the following error message appears::
Setup is unable to obtain network adapter information from the associated DLL files. Operation cannot continue.If you choose to continue it appears as though the installation completes, but the NIC never binds and the network services do not start. The error message reappears if you attempt to view the configuration of the NIC driver.
CAUSEThe Olicom 16/4 NIC requires a driver located in the DRVLIB subdirectory of the Windows NT CD. The full path is DRVLIB\NETCARD\X86\OCTK16. The OLINCDET.DLL file is not copied over during installation. Without this file the adapter information cannot be detected.
WORKAROUND
|
KBCategory:kbsetup
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |