Can't Print to HP JetDirect Printers Over DLC w/Intel Flash32

 Last reviewed: March 27, 1996
Article ID: Q123648
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5

SYMPTOMS

Under Windows NT 3.5, if you are using an Intel Flash32 network interface card (NIC), printing with the DLC protocol to an HP JetDirect card may not work properly. A connection can be made to the printer, but print jobs sent will be spooled and deleted, never printing.

This problem is related to the driver for the Flash32 NIC, written by Intel. Currently, the only workaround is to use a different NIC for printing with DLC.

For additional information, contact Intel technical support at (800) 638- 8686.

The Flash32 network card is manufactured by Intel, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this products' performance or reliability.

Additional reference words: prodnt adapter 3.50 3rdparty
KBCategory: kb3rdparty
KBSubcategory: ntprint nthw

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 27, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.