Protocol Services Change Connecting Over RAS

Last reviewed: August 22, 1996
Article ID: Q124977
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5

When you connect to a remote network site using Windows NT Remote Access Services (RAS), the protocol services may change. By default, RAS connects you to remote sites using their protocol. To change this:

  1. From Remote Access, choose the Edit button.

  2. Choose the Network button

  3. In the Network Protocol Settings dialog box, clear Use Default Gateway on Remote Network.


KBCategory: kbnetwork
KBSubcategory: nttcp ntras NTSrvWkst
Additional reference words: prodnt 3.50


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: August 22, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.