NetBIOS SEND WAIT Call Returns Before RECEIVE is SentLast reviewed: March 12, 1998Article ID: Q125020 |
The information in this article applies to:
SYMPTOMSWhen you develop a NetBIOS application after you establish a NetBIOS session, and then send a SEND WAIT command on one end of the session, the call returns before a RECEIVE command has been sent from the other end of the session. NOTE: This symptom does not appear when you use either NetBEUI or NetBIOS over Nwlink.
RESOLUTIONTo resolve this problem, obtain the fix mentioned below or wait for the next Windows NT service pack.
STATUSMicrosoft has confirmed this to be a problem in Windows NT version 4.0. A supported fix is now available, but has not been fully regression tested and should be applied only to systems experiencing this specific problem. Unless you are severely impacted by this specific problem, Microsoft recommends that you wait for the next Service Pack that contains this fix. Contact Microsoft Technical Support for more information. Keywords : kbbug4.00 kbfix4.00 ntnetserv NTSrvWkst kbnetwork Version : WinNT:4.0 Platform : winnt Issue type : kbbug Solution Type : kbfix |
================================================================================
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |