Unable to Detect RAM Beyond 64 MB On HP Vectra XU P5/90Last reviewed: January 3, 1996Article ID: Q128349 |
The information in this article applies to:
SYMPTOMSAfter you add more than 64 MB of physical memory (RAM) to a Hewlett-Packard (HP) Vectra XU P5/90 or XU P5/90C computer, Windows NT does not detect the additional RAM beyond 64 MB. The computer power on self test (POST) detects the correct amount of memory.
CAUSEThis problem occurs if the BIOS version on your computer is earlier than version GO.05.08.
RESOLUTIONTo correct this problem, upgrade the BIOS on the HP Vectra XU P5/90 computer to version GO.05.08 or later. The BIOS upgrade is available for download from the HP bulletin board service (BBS) at (208) 344-1691. Download GO0508US.EXE. The HP products discussed here are manufactured by Hewlett-Packard, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
|
KBCategory: kb3rdparty
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |